LTX CP70/80/90/100 - type calibrators
The American Association For Laboratory Accreditation (A2LA) has accredited that ATE Support (PE) Calibration Laboratory meets the requirements of ISO/IEC 17025 - 1999 and ANSI/NCSI Z540-1-1994.
In meeting the latest quality standards, all calibration original equipment manufacturers (such as HP, Fluke, LTX, etc…) and their authorized service providers must have their cal labs accredited to meet ISO standards. This means that OEM’s are no longer exempt from meeting this international standard. Make sure that your calibrators are serviced by an ISO accredited lab. Make ATE Support your "Lab of Choice" for LTX77 calibrations.
ATE Support calibration service includes the following:
Full system checkout and general instrument cleaning
Minor repairs (e.g., switch cleaning, lamp replacement, correction of minor faults)
Stabilization: This time interval, specified in the appropriate procedure, is designed to allow adequate time for thermal as well as operational stabilization prior to final calibration. This period also provides an opportunity to monitor stability performance as required.
Performance check: Per ISO/IEC 17025 - 1999 & ANSI/NCSL Z540-1-1994, a performance check is accomplished to determine as-received accuracy with any out-of-tolerance conditions noted and reported to the customer
Final calibration: Final calibration is performed in accordance with calibration procedures that will include all necessary adjustments and recommended tests to assure performance to published specifications and accuracies to comply with ISO/IEC 17025 - 1999 & ANSI/NCSL Z540-1-1994; standards that are traceable to NIST
To ensure reliable / accurate data, 6 Calibration passes are run and averaged.
-
CALDAT Tape or Diskette is supplied
Calibration Certificate, instrument calibration label and seals will be provided where applicable
Calibration data is kept on file for 7 years
A Delta report is available upon request
Calibration exchange service available